Settings
Setting the operating parameters
1
Main view
2
Heater settings
3
Circulation pump settings
4
Settings display
5
Network
6
Systemsettings
7
Log
1
Time
- The time is set automatically as soon as the control is connected to the Internet.
2
Pump
- This symbol shows the status of the circulation pump. It also acts as a switch. By tapping the symbol, the pump can be switched on and off manually.
3
Heating rod
- This symbol shows the status of the heating element. It also acts as a switch. By tapping the symbol, the heating element can be switched on and off manually.
4
Return temperature
- The instrument displays the current return temperature on the sensor.
5
Temperature target
- The set target temperature with the set “spread”.
6
Info Page
- Here you can access the "Info" page with links/QR codes to the control web interface and the documentation/data portal.
7
Main View
- This will always take you back to this main view.
8
Settings
- You can find the settings using this button - the individual setting areas are described below.
9
At the top right there are status symbols (without numbering)
- Displays WiFi network status and reception strength.
- Displays the connection status to the cloud.
1
Operating hours: The operating hours of the heating element. The average life expectancy of heating elements is around 20 years, but depends heavily on the water quality.
2
Heating element: When the heating element is switched on, the pump is automatically activated for safety reasons. When the heating element is switched off, the pump continues to run (pump overrun).
3
Target temperature: Target temperature of the water in the return
4
Spread: Allowed spread of water temperature. This affects the timing of the heating element.
5
ALARM: The temperature at which the alarm is triggered is set here. In the event of an alarm, the red socket is energized and a connected 230V signaling device (e.g. light or siren) is supplied with voltage. The alarm can be switched off on the device screen. However, if the error is not corrected within a certain period of time, the alarm will be triggered again.
1
Operating Hours: The operating hours of the pump. The average life expectancy of circulation pumps is approximately 20 years.
2
Pump: When the pump is switched off, the heating element is deactivated for safety reasons.
3
Interval: Pump interval in summer operation
4
Pump running time: The pump running time in interval operation.
1
LCD timeout: The time until the display switches off automatically.
2
Menu timeout: The time until the display automatically switches to the main view.
3
Screensaver: Activates the LCD screensaver without turning off the backlight (test function). Tap the screen to turn off.
4
LCD: Turns off the backlight. Tap the screen to turn on.
The network data is displayed here.
Currently only WiFi with DHCP is supported. Static IP and a wired Ethernet connection in future releases. The control can generally be retrofitted.
1
IP Address
2
WiFI Network Name (SSID)
3
WiFi reception: The reception strength in dBm. the smaller the number is (towards -100), the worse the reception. A very good reception is around -30dBm - -20dBm
The system settings contain the following settings and data:
1
Operating mode: Summer/Winter operation
2
Operating hours
3
System runtime: since last reboot
4
CPU Temperature: the internal temperature of the microcontroller
5
Firmware: Version of the firmware on the device
6
Reboot: restart the system
The internal log file is displayed here. For error analysis or support purposes, you may be able to find helpful information here. The different colors of the messages mean:
1
black: normal message
2
orange : Warning, no operational impairment is expected
3
red : Error, please contact customer support with the relevant warning message